NTN ael205 Bearing

Angular Contact Ball Bearings

Angular Contact Ball Bearings designed to meet OE manufacturers' demanding requirements. These bearings have a contact angle that enables them to withstand significant axial loads in one direction together with radial loads. They are generally used in pairs, triplex sets, quadruplex sets, or multiplex sets since an axial component is generated when a radial load is applied.
Product Features and Benefits:High Quality Steel - Bearing life extended by up to 80% with Ultra clean steel.，Advanced Grease Technology - Special lubricants can extend grease life and increase performance.，High Grade Balls - Smooth and quiet operation even at high speeds.，Super Finished Raceways - Specially refined to reduce noise and improve lubricant distribution.Contact Angle - Available in 15, 25, 30 and 40 degree angles.Patented Seals - Prevent contamination in the toughest environments.Cages - Available in a range of polyamide, steel and brass cage assemblies.

NSK's Range of Angular Contact Ball Bearings include: double row angular contact ball bearings, four point contact ball bearings, single row angular contact ball bearings, sealed angular contact ball bearings, duplex angular contact ball bearings.

NTN ael205 Bearing: Static load, C0 : 11.5 kN; da min : 45 mm

80 mm x 140 mm x 44,45 mm TIMKEN 5216 Angular Contact Ball Bearings

80 mm x 140 mm x 44,45 mm TIMKEN 5216 Angular Contact Ball Bearings: Limiting speed : 1800 r/min; a : 142.318 mm

2.756 Inch | 70 Millimeter x 4.921 Inch | 125 Millimeter x 1.563 Inch | 39.7 Millimeter TIMKEN 5214WDBR Angular Contact Ball Bearings

2.756 Inch | 70 Millimeter x 4.921 Inch | 125 Millimeter x 1.563 Inch | 39.7 Millimeter TIMKEN 5214WDBR Angular Contact Ball Bearings: P90° : 113 kN; Taconite seal : TER 107

75 mm x 130 mm x 41,28 mm TIMKEN 5215K Angular Contact Ball Bearings

75 mm x 130 mm x 41,28 mm TIMKEN 5215K Angular Contact Ball Bearings: B1 : 52 mm; da max. : 80 mm

70 mm x 125 mm x 39,67 mm TIMKEN 5214K Angular Contact Ball Bearings

70 mm x 125 mm x 39,67 mm TIMKEN 5214K Angular Contact Ball Bearings: Coefficient of friction µ max. : 0.1; Tolerance shaft : h8

75 mm x 130 mm x 41,28 mm TIMKEN 5215 Angular Contact Ball Bearings

75 mm x 130 mm x 41,28 mm TIMKEN 5215 Angular Contact Ball Bearings: Basic dynamic load rating C : 4515 kN; Reference speed : 750 r/min

60 mm x 110 mm x 39,67 mm TIMKEN 5212WD Angular Contact Ball Bearings

60 mm x 110 mm x 39,67 mm TIMKEN 5212WD Angular Contact Ball Bearings: d1 ≈ : 125 mm; das : 121 mm

70 mm x 125 mm x 39,67 mm TIMKEN 5214 Angular Contact Ball Bearings

70 mm x 125 mm x 39,67 mm TIMKEN 5214 Angular Contact Ball Bearings: Stabilizing ring : SR-38-32; Appropriate attachment bolt size G : 1.25 in

65 mm x 120 mm x 38,1 mm TIMKEN 5213K Angular Contact Ball Bearings

65 mm x 120 mm x 38,1 mm TIMKEN 5213K Angular Contact Ball Bearings: Basic dynamic load rating C : 3400 kN; Comparative radial load rating CF : 720 kN

60 mm x 110 mm x 36,53 mm TIMKEN 5212W Angular Contact Ball Bearings

60 mm x 110 mm x 36,53 mm TIMKEN 5212W Angular Contact Ball Bearings: Fillet Radius ra : 1.50 mm; Sealed Speed Rating n3 : 0 rpm

55 mm x 100 mm x 33,32 mm TIMKEN 5211K Angular Contact Ball Bearings

55 mm x 100 mm x 33,32 mm TIMKEN 5211K Angular Contact Ball Bearings: Accessories : One Shield & Snap-Ri; Basic Dynamic Radial Load Rating C : 124000 N

60 mm x 110 mm x 36,53 mm TIMKEN 5212KG Angular Contact Ball Bearings

60 mm x 110 mm x 36,53 mm TIMKEN 5212KG Angular Contact Ball Bearings: d1 : 91.5 mm; G : M 80x2