| CONSOLIDATED BEARING NUTR-45 Cam Follower and Track Roller - Yoke Type | Width (mm):12; Outer Diameter (mm):39; Size (mm):32x39x12; C:12 mm; Fw:32 mm; Weight:0,0292 Kg; (Grease) Lubrication Speed:5300 r/min; Basic static load rating (C0):17,2 kN; Bore Diameter (mm):32; Brand:CX; |
| OSBORN LOAD RUNNERS PLRY-3 Cam Follower and Track Roller - Yoke Type | Weight:0,137 Kg; D:52 mm; Bearing number:NU205; (Grease) Lubrication Speed:13000 r/min; Basic dynamic load rating (C):17,7 kN; Size (mm):25x52x15; F:32 mm; Outer Diameter (mm):52; Width (mm):15; B:15 mm; |
| OSBORN LOAD RUNNERS CLRY-2-1/2 Cam Follower and Track Roller - Yoke Type | Dimension S:3.6 in; Ca - Axial Load Rating:10206 lbf; Dimension V:8.7 in; Dimension H:2.4 in; Seal Type:Kevlar Packing Seal; Dimension B:11.0 in; Support Type:Take-Up; Cor - Static Load Rating:183669 lbf; Shaft Size:5-7/16 in; Bearing - Housing - Seal UPC:013992101907; |
| OSBORN LOAD RUNNERS PLRY-8 Cam Follower and Track Roller - Yoke Type | Outer Diameter (mm):430; Dynamic Load Rating (Cr):7,800,000; Max. housing corner radius, or 45 deg. chamfer (ch):1.100; Bore Dia (d):300.0000; Inner Width (Bi):212.0000; Weight (g):117,000.00; Spherical Diameter (dk or Dk):390.000; Bearing Type:standard; Mis-alignment Angle (a deg.):2; Material:Outer ring made from; |
| CONSOLIDATED BEARING NUTR-17X Cam Follower and Track Roller - Yoke Type | B:28 mm; Size (mm):65x110x28; Basic static load rating (C0):195 kN; Outer Diameter (mm):110; Bearing number:JM511946/10; Bore Diameter (mm):65; d:65 mm; D:110 mm; (Grease) Lubrication Speed:3200 r/min; T:28 mm; |
| CONSOLIDATED BEARING NATV-35 Cam Follower and Track Roller - Yoke Type | Bearing Outside Diameter, Nominal(Do):215.000; Brand:AST; Bearing Length Tolerance (B tol.) - +0 / -0.40:+0 / 0.40; Bearing number:ASTT90 21070; Outer Diameter (mm):215; Housing Bore Dia. (Dh) - 215 +0.046 / -0:215 +0.046 / 0; ID Chamfer Length (Ci):0.600; Shaft Size (ds) - 210 -0.170 / -0.216:210 0.170 / 0.216; Wall Thickness (S3):2.500; Bearing Type:straight; |
| CONSOLIDATED BEARING NUTR-20 Cam Follower and Track Roller - Yoke Type | db - Cone Backface Backing Diameter:38.10 mm; Cone Part Number:15100; G2 - Heat Generation Factor (Rib-Roller End):10; K - Factor7:1.67; da - Cone Frontface Backing Diameter:31.5 mm; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2090 lbf; B - Cone Width:20.638 mm; R - Cone Backface To Clear Radius1:3.560 mm; Series:15000; e - ISO Factor8:0.35; |
| CONSOLIDATED BEARING NATV-15X Cam Follower and Track Roller - Yoke Type | Da max.:622 mm; Basic static load rating (C0):6910 kN; Basic dynamic load rating (C):3370 kN; (Oil) Lubrication Speed:490 r/min; (Grease) Lubrication Speed:370 r/min; da min.:468 mm; D:650 mm; Calculation factor (Y0):2,97; B:157 mm; ra max.:5 mm; |
| OSBORN LOAD RUNNERS PLRY-10 Cam Follower and Track Roller - Yoke Type | B:29,997 mm; Bore Diameter (mm):31.75; Brand:Timken; D:72,626 mm; T1:11,112 mm; d:31.75 mm; Width (mm):29,997; R:3,5 mm; C:23,812 mm; Size (mm):31.75x72.626x29.997; |
| INA LFR5201-NPP Cam Follower and Track Roller - Yoke Type | (Refer.)Mass(kg):14.0; db(min):116; Bearing No.:NU420; Basic dynamic load rating (C):458 kN; Bore Diameter (mm):100; Cr:560; D:250 mm; Db(max):-; Basic static load rating (C0):498 kN; B1:-; |
| CONSOLIDATED BEARING NUTR-40 P/5 Cam Follower and Track Roller - Yoke Type | Brand:NTN; Da max.:139,5 mm; Outer Diameter (mm):134; Basic static load rating (C0):188 kN; ra1 max.:0,6 mm; d:109 mm; Weight:1,87 Kg; da min.:119 mm; (Grease) Lubrication Speed:2 700 r/min; J:131 mm; |
| INA LFR50/8-NPP Cam Follower and Track Roller - Yoke Type | f0:14.7; Mass:5.05 kg; B:63,500 mm; Characteristic inner ring frequency, BPFI:8.2 Hz; Max operating temperature, Tmax:120 °C; Precision class:P0; Characteristic outer ring frequency, BPF0:5.8 Hz; Outer Diameter (mm):150,000; Fatigue limit load, Cu:10.5 kN; Nlim:4,300 rpm; |
| CARTER MFG. CO. NYR-24-A Cam Follower and Track Roller - Yoke Type | Size (mm):25x32x24; Basic static load rating (C0):33.4 kN; Bearing number:HK2524.2RS; Fw:25 mm; C:24 mm; r5 min.:1 mm; Bore Diameter (mm):25; D:32 mm; Weight / Kilogram:0.04; Weight:0.047 Kg; |
| CARTER MFG. CO. SY-48-S Cam Follower and Track Roller - Yoke Type | Calculation factor fHC:1; Calculation factor f1:1; D1:23 mm; rb max.:0.15 mm; Static axial stiffness, preload class B:31 N/µm; Calculation factor - f2C:1.16; dn:20.4 mm; Fatigue load limit Pu:0.068 kN; Static axial stiffness, preload class A:18 N/µm; Reference grease quantity Gref:0.09 cm³; |
| INA NUTR1542-X Cam Follower and Track Roller - Yoke Type | Characteristic cage frequency, FTF:0.43 Hz; Dynamic load, C:108 kN; Category:Roller Bearings; r1 min.:1,5 mm; Manufacturer Name:NTN; ra max:2 mm; Rating life coefficient, A2:1.4; D:100 mm; Cb min:5.5 mm; Weight:0,876 Kg; |
| CONSOLIDATED BEARING NUTR-40X Cam Follower and Track Roller - Yoke Type | Aa - Cage-Cone Backface Clearance:1.3 mm; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:4160 lbf; Da - Cup Frontface Backing Diameter:66.00 mm; D:68.263 mm; Cg - Geometry Factor:0.0771; db - Cone Backface Backing Diameter:41.91 mm; Bearing Weight:0.4 Kg; Design Units:Imperial; C90 - Dynamic Radial Rating (90 million revolutions)4:4450 lbf; R - Cone Backface To Clear Radius1:2.290 mm; |