| No. | Brand | s | A | a | L | b | J | T | w |
| 5216 | TIMKEN | - | - | 142.318 mm | - | 9 mm | - | - | - |
| 7208WN MBR SU | TIMKEN | - | - | - | - | - | - | - | - |
| 5310MFF | SKF | - | - | - | - | - | - | - | - |
| 3317 A/C3 | SKF | - | - | - | - | - | - | - | - |
| 5414WBR | TIMKEN | - | - | - | - | - | - | - | - |
| 5212W | TIMKEN | - | - | - | - | - | - | - | - |
| QJ 319 N2MA/C2L | SKF | - | - | - | - | - | - | - | - |
| QJ 332 N2MA/C3 | SKF | - | - | - | - | - | - | - | - |
| 5408 | TIMKEN | - | - | - | - | - | - | - | - |
| 3207 E/C3 | SKF | - | - | - | - | - | - | - | - |
| 7206WN SU | TIMKEN | - | - | - | - | - | - | - | - |
| 7236 BCAM | SKF | - | - | - | - | - | - | - | - |
| QJ 318 N2MA/C3 | SKF | - | 4 mm | - | - | - | - | - | - |
| 5213K | TIMKEN | - | - | - | - | - | - | - | - |
| 7207WN SU | TIMKEN | - | - | - | - | - | 750 mm | - | - |
| 5410 | TIMKEN | - | - | - | - | - | - | - | - |
| 5310MG | SKF | - | - | - | - | - | - | - | - |
| 7219WN MBR | TIMKEN | - | - | - | - | - | - | - | - |
| 3311 A-2RS1/C3MT33 | SKF | - | - | - | - | - | - | - | - |
| QJ 314 N2MA/C3 | SKF | 29.766 mm | 73.025 mm | - | - | - | - | - | - |
| 7306WN SU | TIMKEN | - | - | - | - | - | - | - | - |
| 5412WBR | TIMKEN | - | - | - | - | 6 mm | - | - | - |
| 3208 A-Z/C3 | SKF | - | - | - | - | - | - | - | - |
| QJ 330 N2MA | SKF | - | - | - | - | - | - | - | - |
| 5311CFF | SKF | - | - | - | - | - | - | - | - |
| QJ 224 N2MA/C3 | SKF | - | - | - | - | - | - | - | - |
| 0.669 Inch | 17 Millimeter x 1.575 Inch | 40 Millimeter x 0.689 Inch | 17.5 Millimeter SKF 3203 A-2ZTN9/C3 Angular Contact Ball Bearings | d:12 mm; Permissible sliding velocity v min.:0.25 m/s; D:16 mm; Mass bushing:0.012 kg; Coefficient of friction µ min.:0.05; B:20 mm; Specific static load factor K0:20 N/mm²; Tolerance housing:H7; Specific dynamic load factor K:10 N/mm²; Permissible sliding velocity v max.:5 m/s; Size (mm):0.669 Inch | 17 Millimeter x 1.575 Inch | 40 Millimeter x 0.689 Inch | 17.5 Millimeter ; |
| 40 mm x 80 mm x 18 mm TIMKEN 7208WN Angular Contact Ball Bearings | Da:310 mm; H1:190 mm; Locating ring:2 x FRB 6/310; J:480 mm; Q180°:900 kN; J1:120 mm; L:560 mm; Mass housing:97.5 kg; Initial grease fill, 20%:1.2 kg; Bearing (basic designation):23234; Size (mm):40 mm x 80 mm x 18 mm ; |
| 0.787 Inch | 20 Millimeter x 1.85 Inch | 47 Millimeter x 0.811 Inch | 20.6 Millimeter SKF 3204 A-Z Angular Contact Ball Bearings | Height base to center H1:47.625 mm; Inner ring width B:69.85 mm; Housing width A1:72.231 mm; Overall housing height H:100.013 mm; Attachment bolt diameter G:12.7 mm; Distance between attachment bolts J min.:119.063 mm; Housing length L:174.625 mm; Limiting speed:1700 r/min; Basic dynamic load rating C:73.8 kN; Centreline of "fixed" bearing S:0.794 mm; Size (mm):0.787 Inch | 20 Millimeter x 1.85 Inch | 47 Millimeter x 0.811 Inch | 20.6 Millimeter ; |
| 3.346 Inch | 85 Millimeter x 8.268 Inch | 210 Millimeter x 3.625 Inch | 92.08 Millimeter TIMKEN 5417WBR Angular Contact Ball Bearings | d1 ≈:200 mm; Basic dynamic load rating C:297 kN; b1:7 mm; Limiting speed:1500 r/min; s max.:3 mm; Basic static load rating C0:695 kN; Fatigue load limit Pu:69.5 kN; ra max.:1 mm; D:225 mm; Reference speed:1200 r/min; Size (mm):3.346 Inch | 85 Millimeter x 8.268 Inch | 210 Millimeter x 3.625 Inch | 92.08 Millimeter ; |
| 1.969 Inch | 50 Millimeter x 4.331 Inch | 110 Millimeter x 1.748 Inch | 44.4 Millimeter SKF 5310MFF Angular Contact Ball Bearings | Mass inner ring:0.29 kg; B:30 mm; d:75 mm; F:85 mm; r, r1,2 min.:1 mm; Size (mm):1.969 Inch | 50 Millimeter x 4.331 Inch | 110 Millimeter x 1.748 Inch | 44.4 Millimeter ; |
| 1.772 Inch | 45 Millimeter x 3.346 Inch | 85 Millimeter x 0.748 Inch | 19 Millimeter SKF 7209PJDE-BRZ Angular Contact Ball Bearings | Fillet Radius ra:1.00 mm; D:130.0000 mm; Oil Speed Rating Open/Shielded n2:5600 rpm; Basic Static Radial Load Rating Co:33500 N; B:18.00 mm; Accessories:One Shield; Basic Dynamic Radial Load Rating C:33800 N; d:95.000 mm; Sealed Speed Rating n3:2900 rpm; Grease Speed Rating Open/Shielded n1:4800 rpm; Size (mm):1.772 Inch | 45 Millimeter x 3.346 Inch | 85 Millimeter x 0.748 Inch | 19 Millimeter ; |
| 2.953 Inch | 75 Millimeter x 7.48 Inch | 190 Millimeter x 3.25 Inch | 82.55 Millimeter SKF 5415 A Angular Contact Ball Bearings | Cap bolt recommended tightening torque:298.3 N·m; Labyrinth ring:2 x LOR 120; Eye bolt:2 x 3/8-16 UNC; End plug (suffix Y):EPR 27; P60°:249 kN; PG:1/4 NPT; Cap bolt, SAE grade:8; Bearing:23028 CCK/W33; Mass pillow block:61.2 kg; A2:190.5 mm; Size (mm):2.953 Inch | 75 Millimeter x 7.48 Inch | 190 Millimeter x 3.25 Inch | 82.55 Millimeter ; |
| 3.543 Inch | 90 Millimeter x 7.48 Inch | 190 Millimeter x 1.693 Inch | 43 Millimeter SKF QJ 318 N2MA/C3 Angular Contact Ball Bearings | G2:M 6; G:Tr 380x5; A:4 mm; d:380 mm; Locking device:MS 3080-76; B1:164 mm; d1:360 mm; Mass adapter sleeve assembly:33.6 kg; d3:450 mm; Hydraulic nut:HMV 76E; Size (mm):3.543 Inch | 90 Millimeter x 7.48 Inch | 190 Millimeter x 1.693 Inch | 43 Millimeter ; |
| 60 mm x 110 mm x 39,67 mm TIMKEN 5212WD Angular Contact Ball Bearings | d1 ≈:125 mm; das:121 mm; B:40 mm; Calculation factor kr:0.25; D:150 mm; Fatigue load limit Pu:49 kN; b1:6 mm; da min.:116 mm; D1 ≈:133.5 mm; ra max.:1 mm; Size (mm):60 mm x 110 mm x 39,67 mm ; |
| 1.772 Inch | 45 Millimeter x 4.724 Inch | 120 Millimeter x 2.125 Inch | 53.98 Millimeter TIMKEN 5409WBR Angular Contact Ball Bearings | Basic Static Radial Load Rating Co:17000 N; Oil Speed Rating Open/Shielded n2:11000 rpm; d:30.000 mm; B:16.00 mm; Fillet Radius ra:1.00 mm; Accessories:One Shield & Snap-Ri; D:62.0000 mm; Basic Dynamic Radial Load Rating C:22900 N; Grease Speed Rating Open/Shielded n1:9000 rpm; Size (mm):1.772 Inch | 45 Millimeter x 4.724 Inch | 120 Millimeter x 2.125 Inch | 53.98 Millimeter ; |
| 1.378 Inch | 35 Millimeter x 2.835 Inch | 72 Millimeter x 1.063 Inch | 27 Millimeter SKF 3207 E/C3 Angular Contact Ball Bearings | d:45 mm; Pu:12.800 kN; rs Dynamic (Cr):1.5 mm; B:25 mm; D:100 mm; with tapered bore:1309 ; B1:mm; with cylindrical bore:7 500 min-1; Static (Cor):39.140 kN; Grease:0.580 kN; Size (mm):1.378 Inch | 35 Millimeter x 2.835 Inch | 72 Millimeter x 1.063 Inch | 27 Millimeter ; |
| 1.575 Inch | 40 Millimeter x 3.15 Inch | 80 Millimeter x 0.709 Inch | 18 Millimeter TIMKEN 7208WN MBR SU Angular Contact Ball Bearings | rs (min):7.5 mm; d:460 mm; Grease:10950 kN; B:240 mm; Static (Cor):22.3 mm; D:760 mm; Oil:768.770 kN; with cylindrical bore:320 min-1; Dynamic (Cr):12 mm; Pu:5720 kN; Size (mm):1.575 Inch | 40 Millimeter x 3.15 Inch | 80 Millimeter x 0.709 Inch | 18 Millimeter ; |
| 1.969 Inch | 50 Millimeter x 4.331 Inch | 110 Millimeter x 1.748 Inch | 44.4 Millimeter SKF 5310MZZG Angular Contact Ball Bearings | D:62.0000 mm; Sealed Speed Rating n3:7000 rpm; Grease Speed Rating n1:7000 rpm; Fillet Radius ra:1.00 mm; Accessories:One Seal & Snap-Ring; B:27.00 mm; Basic Static Radial Load Rating Co:20400 N; Basic Dynamic Radial Load Rating C:28600 N; Oil Speed Rating n2:9500 rpm; d:30.000 mm; Size (mm):1.969 Inch | 50 Millimeter x 4.331 Inch | 110 Millimeter x 1.748 Inch | 44.4 Millimeter ; |
| 1.969 Inch | 50 Millimeter x 4.331 Inch | 110 Millimeter x 1.748 Inch | 44.4 Millimeter SKF 5310M Angular Contact Ball Bearings | da min.:400 mm; Fatigue load limit Pu:520 kN; ra max.:4 mm; D1 ≈:551 mm; d:380 mm; D:620 mm; Reference speed:750 r/min; Da min.:526 mm; Da max.:600 mm; Mass bearing:243 kg; Size (mm):1.969 Inch | 50 Millimeter x 4.331 Inch | 110 Millimeter x 1.748 Inch | 44.4 Millimeter ; |
| 70 mm x 125 mm x 39,67 mm TIMKEN 5214K Angular Contact Ball Bearings | Coefficient of friction µ max.:0.1; Tolerance shaft:h8; B:8 mm; Specific dynamic load factor K:10 N/mm²; Permissible sliding velocity v max.:5 m/s; D:11 mm; Permissible sliding velocity v min.:0.25 m/s; Coefficient of friction µ min.:0.05; Tolerance housing:H7; Mass bushing:0.002 kg; Size (mm):70 mm x 125 mm x 39,67 mm ; |
| 2.756 Inch | 70 Millimeter x 7.087 Inch | 180 Millimeter x 3.125 Inch | 79.38 Millimeter SKF 5414 A/C3 Angular Contact Ball Bearings | Basic Dynamic Radial Load Rating C:49400 N; Fillet Radius ra:1.50 mm; Grease Speed Rating n1:5600 rpm; Accessories:One Shield; Oil Speed Rating n2:7500 rpm; Sealed Speed Rating n3:5600 rpm; D:80.0000 mm; Basic Static Radial Load Rating Co:34500 N; B:38.10 mm; d:35.000 mm; Size (mm):2.756 Inch | 70 Millimeter x 7.087 Inch | 180 Millimeter x 3.125 Inch | 79.38 Millimeter ; |
Timken 7206WN Bearing 30X62X16mm:
Brand Name, Timken. Item Weight, 2.20 pounds. Number of Items, 1. Part Number, 7206WN. UNSPSC Code, 32000000
7206WN TIMKEN Bearing | 7206WN, Fafnir® Single Row
Browse Timken Part Number 7206WN, Fafnir® Single Row Angular Contact Ball Bearings (7200, 7300, 7400) in the The Timken Company catalog including
Timken Part Number 7206WN, Fafnir® Single Row Angular
Timken® angular contact ball bearings are designed for combination radial and axial loading. Single-row bearings have high thrust capacity in one direction
7206WN - Timken CAD
Browse Part Number 7206WN, Fafnir® Single Row Angular Contact Ball Bearings (7200, 7300, 7400) in the The Timken Company catalog including Part
Original 7206WN bearing - TIMKEN 7206WN bearing, 30x62x16
Original TIMKEN 7206WN bearing. 30x62x16. Shop Timken Co. 7206WN SU at Applied.com, which includes; Single Row Angular Contact Bearing, 30 mm ID x
Bearing 7206WN (Timken) | Size and Specification | Bearings
Angular contact ball bearings 7206WN. Bearing number : 7206WN. Size (mm) : 30x62x16. Brand : Timken. Bore Diameter (mm) : 30. Outer Diameter (mm) : 62
Timken 7206WN bearing,7206WN Angular Contact Ball
Jul 29, 2018 - We has been built up long-term cooperation with Timken company, could make a bulk order of the 7206WN Which Timken 7206WN is the most
Timken (Fafnir) - 7206WN - Motion Industries
Timken (Fafnir) 7206WN. Angular Contact Bearing - 30 mm Bore, 62 mm OD, 16 mm Width, Open, 40 ° Contact Angle, C0
timken 7206wn su bearing | Original Brand Bearing | Request A Quote
Explorer series bearing of timken 7206wn su bearing are better than any brand bearings currently in bearing performance , lifetime, design, and the use of
30 mm x 62 mm x 16 mm TIMKEN 7206WN Angular Contact Ball Bearings Video