| No. | Brand | s | A | a | L | b | J | T | w |
| 7314 BEN1GAM | SKF | - | - | - | - | - | - | - | - |
| QJ 224 N2MA/C3 | SKF | - | - | - | - | - | - | - | - |
| ael205 | NTN | - | - | - | - | - | - | - | - |
| 5212WD | TIMKEN | - | - | - | - | - | - | - | - |
| 7306WN SU | TIMKEN | - | - | - | - | - | - | - | - |
| 5415WBR | TIMKEN | - | - | - | - | - | 116.5 mm | - | - |
| 5310MG | SKF | - | - | - | - | - | - | - | - |
| 7236 BCAM | SKF | - | - | - | - | - | - | - | - |
| 3314 ANR | SKF | - | - | - | - | - | - | - | - |
| 7209WN | TIMKEN | - | - | - | - | - | - | - | - |
| 5416 A/C3 | SKF | - | - | - | - | 18 mm | - | 155 mm | - |
| 5212KG | TIMKEN | - | - | - | - | 8 mm | - | - | - |
| 7207WN SU | TIMKEN | - | - | - | - | - | 750 mm | - | - |
| 7206WN SU | TIMKEN | - | - | - | - | - | - | - | - |
| 3202 A-2RS1TN9/W64 | SKF | - | - | - | - | - | - | - | - |
| 7204W SU | TIMKEN | - | - | - | - | 5 mm | - | - | - |
| 5310MFF | SKF | - | - | - | - | - | - | - | - |
| 5214WDBR | TIMKEN | - | - | - | 466.725 mm | - | - | - | - |
| 3207 A-2RS1/VT143 | SKF | - | - | - | - | - | - | 179 mm | - |
| QJ 318 N2MA/C3 | SKF | - | 4 mm | - | - | - | - | - | - |
| 3315 A-2Z/C3MT33 | SKF | - | - | - | - | - | - | - | - |
| 5413 A | SKF | - | - | - | - | - | - | - | - |
| 5214K | TIMKEN | - | - | - | - | - | - | - | - |
| 7208WN DU | TIMKEN | - | - | - | - | - | - | - | - |
| 3208 A-Z/C3 | SKF | - | - | - | - | - | - | - | - |
| 3207 ENR | SKF | - | - | - | - | - | - | - | - |
| 5310CZZG | SKF | - | - | - | - | - | - | - | - |
| 0.787 Inch | 20 Millimeter x 1.85 Inch | 47 Millimeter x 1.102 Inch | 28 Millimeter TIMKEN 7204W DU Angular Contact Ball Bearings | Stabilizing ring:SR-20-17; P120°:35.6 kN; P60°:94.3 kN; R2:30.163 mm; h:44.45 mm; S:4.763 mm; Da:180 mm; Cap bolt recommended tightening torque:515.2 N·m; H1:114.3 mm; Housing:SAF 617; Size (mm):0.787 Inch | 20 Millimeter x 1.85 Inch | 47 Millimeter x 1.102 Inch | 28 Millimeter ; |
| 150 mm x 320 mm x 65 mm SKF QJ 330 N2MA Angular Contact Ball Bearings | A1:228.6 mm; Max. speed for PosiTrac Plus seal:575 r/min; P180°:185 kN; J max.:749.3 mm; A2:315.119 mm; Appropriate attachment bolt size G:1.5 in; Da:419.999 mm; P90°:271 kN; Labyrinth ring:2 x LOR 607; J min.:666.75 mm; Size (mm):150 mm x 320 mm x 65 mm ; |
| 95 mm x 200 mm x 45 mm SKF 7319 BEGAF Angular Contact Ball Bearings | B:69 mm; d:670 mm; Calculation factor X:0.41; Mass bearing:77 kg; Basic dynamic load rating C:553 kN; d1 ≈:720.5 mm; Reference speed:700 r/min; Db max.:813 mm; Calculation factor A:9.48; Limiting speed:750 r/min; Size (mm):95 mm x 200 mm x 45 mm ; |
| 3.74 Inch | 95 Millimeter x 7.874 Inch | 200 Millimeter x 3.063 Inch | 77.8 Millimeter SKF 3319 A/C3 Angular Contact Ball Bearings | Calculation factor (back-to-back, face-to-face) Y1:0.92; Calculation factor f1:0.99; B:15 mm; Basic static load rating C0:10.4 kN; Calculation factor f2B:1.02; Preload class A GA:100 N; Basic dynamic load rating C:15.9 kN; Number of balls z:18; Preload class B GB:200 N; Ball diameter Dw:7.938 mm; Size (mm):3.74 Inch | 95 Millimeter x 7.874 Inch | 200 Millimeter x 3.063 Inch | 77.8 Millimeter ; |
| 1.181 Inch | 30 Millimeter x 2.441 Inch | 62 Millimeter x 0.937 Inch | 23.8 Millimeter SKF 3206 A-RS1 Angular Contact Ball Bearings | d2 (max):mm; Dynamic (Ca):123 kN; E:mm; D:110 mm; d2:50 mm; Pu:15.370 kN; b1:mm; Static (Coa):126 kN; B:40 mm; F:65 mm; Size (mm):1.181 Inch | 30 Millimeter x 2.441 Inch | 62 Millimeter x 0.937 Inch | 23.8 Millimeter ; |
| 1.378 Inch | 35 Millimeter x 2.835 Inch | 72 Millimeter x 1.063 Inch | 27 Millimeter SKF 3207 ANR Angular Contact Ball Bearings | ra:0.6 max; D:30 mm; Static (Cor):5.840 kN; da:14 min; Dynamic (Cr):9.253 kN; rs (min):0.6 mm; Grease:16 000 min-1; Pu:0.265 kN; Weight:0.05 kg; Oil:19 000 min-1; Size (mm):1.378 Inch | 35 Millimeter x 2.835 Inch | 72 Millimeter x 1.063 Inch | 27 Millimeter ; |
| 1.772 Inch | 45 Millimeter x 3.346 Inch | 85 Millimeter x 0.748 Inch | 19 Millimeter SKF 7209PJDE-BRZ Angular Contact Ball Bearings | Fillet Radius ra:1.00 mm; D:130.0000 mm; Oil Speed Rating Open/Shielded n2:5600 rpm; Basic Static Radial Load Rating Co:33500 N; B:18.00 mm; Accessories:One Shield; Basic Dynamic Radial Load Rating C:33800 N; d:95.000 mm; Sealed Speed Rating n3:2900 rpm; Grease Speed Rating Open/Shielded n1:4800 rpm; Size (mm):1.772 Inch | 45 Millimeter x 3.346 Inch | 85 Millimeter x 0.748 Inch | 19 Millimeter ; |
| 4.331 Inch | 110 Millimeter x 7.874 Inch | 200 Millimeter x 2.992 Inch | 76 Millimeter SKF 97222UP2-BRZ Angular Contact Ball Bearings | Dimension J:0.3125 in; Dimension H:1.0000 in; Weight W:1.60 lb; Dimension N:0.7813 in; Dimension D2:2.6875 in; Shaft Diameter D:1 1/4 in; Pin Dia A1:0.2500 in; Basic Dynamic Radial Load Rating:5730 lbf; Dimension L:4.5000 in; Dimension B:4.1250 in; Size (mm):4.331 Inch | 110 Millimeter x 7.874 Inch | 200 Millimeter x 2.992 Inch | 76 Millimeter ; |
| 1.575 Inch | 40 Millimeter x 3.15 Inch | 80 Millimeter x 1.189 Inch | 30.2 Millimeter SKF 3208 A-Z/C3 Angular Contact Ball Bearings | Basic Static Radial Load Rating Co:3550 N; Fillet Radius rb:0.10 mm; Oil Speed Rating n2:80000 rpm; D:24.0000 mm; Grease Speed Rating n1:55000 rpm; Basic Dynamic Radial Load Rating C:5270 N; d:12.000 mm; B:12.00 mm; Fillet Radius ra:0.30 mm; Size (mm):1.575 Inch | 40 Millimeter x 3.15 Inch | 80 Millimeter x 1.189 Inch | 30.2 Millimeter ; |
| 45 mm x 85 mm x 19 mm TIMKEN 7209WN Angular Contact Ball Bearings | Basic Dynamic Radial Load Rating C:42300 N; Sealed Speed Rating n3:3400 rpm; Accessories:Seal & Snap-Ring; B:20.00 mm; Basic Static Radial Load Rating Co:35500 N; Oil Speed Rating Open/Shielded n2:6700 rpm; Grease Speed Rating Open/Shielded n1:5600 rpm; Fillet Radius ra:1.00 mm; D:115.0000 mm; d:75.000 mm; Size (mm):45 mm x 85 mm x 19 mm ; |
| 1.969 Inch | 50 Millimeter x 4.331 Inch | 110 Millimeter x 1.748 Inch | 44.4 Millimeter SKF 5310MFF Angular Contact Ball Bearings | Mass inner ring:0.29 kg; B:30 mm; d:75 mm; F:85 mm; r, r1,2 min.:1 mm; Size (mm):1.969 Inch | 50 Millimeter x 4.331 Inch | 110 Millimeter x 1.748 Inch | 44.4 Millimeter ; |
| 1.575 Inch | 40 Millimeter x 3.15 Inch | 80 Millimeter x 1.189 Inch | 30.2 Millimeter SKF 3208 A-2RS1/C3 Angular Contact Ball Bearings | Oil Speed Rating Open/Shielded n2:5000 rpm; Basic Dynamic Radial Load Rating C:44200 N; Fillet Radius ra:1.00 mm; Grease Speed Rating Open/Shielded n1:4300 rpm; Basic Static Radial Load Rating Co:44000 N; B:20.00 mm; d:105.000 mm; D:145.0000 mm; Accessories:One Shield; Sealed Speed Rating n3:2600 rpm; Size (mm):1.575 Inch | 40 Millimeter x 3.15 Inch | 80 Millimeter x 1.189 Inch | 30.2 Millimeter ; |
| 65 mm x 120 mm x 38,1 mm TIMKEN 5213K Angular Contact Ball Bearings | Basic dynamic load rating C:3400 kN; Comparative radial load rating CF:720 kN; Calculation factor Y0:1.45; d:330.302 mm; D:438.023 mm; Calculation factor e:0.45; r1,2 min.:1 mm; Fatigue load limit Pu:550 kN; d1 ≈:345 mm; Comparative axial load rating CFa:158 kN; Size (mm):65 mm x 120 mm x 38,1 mm ; |
| 20 mm x 52 mm x 15 mm TIMKEN 7304WN Angular Contact Ball Bearings | U:26 mm; Fatigue load limit Pu:28.5 kN; Reference speed:2400 r/min; Fw:165 mm; Ew:173 mm; Limiting speed:2800 r/min; Basic static load rating C0:265 kN; Mass needle roller and cage assembly:0.32 kg; Basic dynamic load rating C:76.5 kN; Size (mm):20 mm x 52 mm x 15 mm ; |
| NTN ael205 Bearing | Static load, C0:11.5 kN; da min:45 mm; d:40 mm; Radial clearance class:CN; Nlim (oil):12,000 rpm; f0:15.2; ra max:1 mm; Da max:63 mm; Brand:NTN; Max operating temperature, Tmax:120 °C; |
| 1.181 Inch | 30 Millimeter x 2.441 Inch | 62 Millimeter x 0.63 Inch | 16 Millimeter TIMKEN 7206WN SU Angular Contact Ball Bearings | d:17.000 mm; Fillet Radius rb:0.10 mm; Oil Speed Rating n2:62000 rpm; Grease Speed Rating n1:41000 rpm; B:14.00 mm; D:30.0000 mm; Fillet Radius ra:0.30 mm; Basic Dynamic Radial Load Rating C:8710 N; Basic Static Radial Load Rating Co:6100 N; Size (mm):1.181 Inch | 30 Millimeter x 2.441 Inch | 62 Millimeter x 0.63 Inch | 16 Millimeter ; |
2.953 Inch | 75 Millimeter x 7.48 Inch | 190 Millimeter x 3.25 Inch | 82.55 Millimeter SKF 5415 A Angular Contact Ball Bearings Video