Cylindrical Roller Bearings
Cylindrical roller bearings are available in a wide range of designs, series, variants and sizes. The main design differences are the number of roller rows and the inner/outer ring flanges as well as cage designs and materials.
The bearings can meet the challenges of applications faced with heavy radial loads and high speeds. Accommodating axial displacement (except for bearings with flanges on both the inner and outer rings), they offer high stiffness, low friction and long service life.
Cylindrical roller bearings are also available in sealed or split designs. In sealed bearings, the rollers are protected from contaminants, water and dust, while providing lubricant retention and contaminant exclusion. This provides lower friction and longer service life. Split bearings are intended primarily for bearing arrangements which are difficult to access, such as crank shafts, where they simplify maintenance and replacements.
- 7.087 Inch | 180 Millimeter x 12.598 Inch | 320 Millimeter x 3.386 Inch | 86 Millimeter TIMKEN NJ2236EMA Cylindrical Roller Bearings
- 4.125 Inch | 104.775
- 10 Inch | 254Millime
- 3.74 Inch | 95 Millimeter x 6.693 Inch | 170 Millimeter x 1.693 Inch | 43 Millimeter TIMKEN NJ2219EMAC3 Cylindrical Roller Bearings
- Angular Contact Ball
- Ball Bearing
- 3.15 Inch | 80 Millimeter x 5.512 Inch | 140 Millimeter x 1.299 Inch | 33 Millimeter TIMKEN NJ2216EMAC3 Cylindrical Roller Bearings
- 3.5 Inch | 88.9 Mill
- Pillow Block Bearing
- 3.543 Inch | 90 Millimeter x 6.299 Inch | 160 Millimeter x 1.575 Inch | 40 Millimeter TIMKEN NJ2218EMAC3 Cylindrical Roller Bearings
- Flange Block
- 3.938 Inch | 100.025